Introduction

In order to remove your hard drive for any reason, take the following steps to do so correctly.

Pièces

Aucune pièce nécessaire.

Make sure you completely power down the computer before beginning this process.
  • Make sure you completely power down the computer before beginning this process.

  • With your finger, push this slide to the right. The battery should pop out of place.

Ajouter un commentaire

Pull the battery out of its place gently.
  • Pull the battery out of its place gently.

Ajouter un commentaire

  • Lift up the flap using a plastic opening tool.

  • Hold the flap back with your finger.

Ajouter un commentaire

  • Unscrew the 5.2mm screw underneath the flap.

Ajouter un commentaire

  • Once the screw is out, pull on the plastic tab to pull off the plastic cover.

Ajouter un commentaire

  • Unscrew the 5.2mm screws holding the hard drive in place.

  • Gently pull the rubber hard drive mount to the side.

  • Pull the drive out.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joseph Rockwell

Membre depuis le 22/01/2018

243 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S11-G5, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S11-G5, Banghart Winter 2018

CPSU-BANGHART-W18S11G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 73