Introduction

Before proceeding with this guide, be sure you have all the required tools and the replacement hard drive.

Pièces

Aucune pièce nécessaire.

  1. Remove the ten 10.7 mm Phillips #0 screws from the back cover of the Asus laptop. Remove the ten 10.7 mm Phillips #0 screws from the back cover of the Asus laptop.
    • Remove the ten 10.7 mm Phillips #0 screws from the back cover of the Asus laptop.

  2. Insert the heavy duty spudger between the back cover and the laptop frame. Pull the black pry tool along the edge of the laptop, unlatching the back cover from the frame. Insert the heavy duty spudger between the back cover and the laptop frame. Pull the black pry tool along the edge of the laptop, unlatching the back cover from the frame.
    • Insert the heavy duty spudger between the back cover and the laptop frame. Pull the black pry tool along the edge of the laptop, unlatching the back cover from the frame.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Remove the four 4.7mm Philips #0 screws securing the hard drive. Remove the four 4.7mm Philips #0 screws securing the hard drive.
    • Remove the four 4.7mm Philips #0 screws securing the hard drive.

  5. Remove the hard drive by sliding it out of its socket.
    • Remove the hard drive by sliding it out of its socket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Set Strat

Membre depuis le 01/11/2018

109 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S2-G3, Harley Fall 2018 Membre de l'équipe IUPUI, Team S2-G3, Harley Fall 2018

IUPUI-HARLEY-F18S2G3

3 membres

2 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 9

30 derniers jours : 29

Total : 161