Introduction

The screen is one of the most important parts of a laptop, as you won't be able to see anything you're doing without it, which is kind of the point. The disassembly isn't too complicated, there's just a lot of screws that need to be removed.

    • Make sure your device is unplugged and turned off before proceeding.

    • Using a Spudger, gently pry up the keyboard.

    • Rotate the keyboard to face downward.

    • Pull out the blue wiring connection. Use tweezers to make it easier to remove.

    • Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.

    • Slide the disk drive out of the device.

    • On both the front and back panel, remove every screw you see.

    • Use the spudger to pry up the front panel from the back panel.

    • Using the Philips screwdriver, unscrew the screws shown in the pictures.

    • Unplug the wire connecting the screen to the motherboard.

    • Take the screen off by pulling it straight up off the bottom.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jonathan Cole

Membre depuis le 21/09/2018

193 Réputation

2 tutoriels rédigés

Équipe

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 18

Total : 43