Réparez vos affaires Communauté Boutique

ASUS ZenWatch Charging Cradle Circuit board Replacement

Introduction

Replacing the circuit in the charging cradle

Ce dont vous avez besoin

  1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: étape 1, image 1 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: étape 1, image 2 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: étape 1, image 3 de 3

    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

    Traduire

  3. ASUS ZenWatch Charging Cradle Circuit board Replacement: étape 2, image 1 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: étape 2, image 2 de 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: étape 2, image 3 de 3

    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Wayne McClure

Membre depuis le 02/10/16

961 Réputation

5 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

Équipe

USF Tampa, Team 1-3, Sullivan Spring 2016 Membre de l'équipe USF Tampa, Team 1-3, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G3

4 membres

7 tutoriels rédigés

Un commentaire

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 15

Total : 2,871