Aller au contenu principal
  1. Loosen the back cover using the suction cup.
    • Loosen the back cover using the suction cup.

    • Pull up on all four corners of the back with the suction cup.

  2. Gently place the small opening tool in the crevice created by loosening the back.
    • Gently place the small opening tool in the crevice created by loosening the back.

    • Slide the opening tool around the edges of the device.

    • Wedge it open using the plastic opening tool.

  3. Gently pull off the black tape.
    • Gently pull off the black tape.

  4. Remove the wires with the tweezers by pulling them  upward.
    • Remove the wires with the tweezers by pulling them upward.

  5. Pull the speakers upward with you hand. Pull the speakers upward with you hand.
    • Pull the speakers upward with you hand.

Conclusion

To reassemble your device you will need to solder the wires back in position and then follow the other steps in reverse order.

Une autre personne a terminé cette réparation.

Jordan Alonso

Membre depuis le 18/09/2018

121 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 1

Total : 72