Introduction
This guide will show you how to gain access to the LCD Control Board and the Backlight Control Board on an Apple Cinema Display M8149. The tools required for this section are the spudger and the PH 2 screwdriver.
Ce dont vous avez besoin
-
-
Flip the Cinema Display so it is on its face and the feet are pointed away from you.
-
Using the Hex 2 screwdriver, unscrew the three feet screws (9.52 x 4.43mm).
-
Remove the back foot from the hinge mount by grabbing the foot and pulling upwards.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
Un commentaire
thank you for this guide. my 22" adc didn't want to start up. after following this guide, it now works with my G4. thank you