Introduction
This guide will require you to disassemble the rear and side panels of the printer in order to access the circuit board.
Ce dont vous avez besoin
-
-
Remove the top hinged panel by taking out the pins at the bottom of this panel.
-
-
-
Remove the front panel by gently freeing the holes on the panel from the pegs attached to the main printer body one at a time. Make sure to remove the entire front panel, not just the flap on the paper tray.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.