Aller au contenu principal

Acer AL1714 Video Display Board

Ce dont vous avez besoin

  1. Acer AL1714 Video Display Board, Video Display Board: étape 1, image 1 de 2 Acer AL1714 Video Display Board, Video Display Board: étape 1, image 2 de 2
    • Turn the monitor face-down.

    • Unscrew the 5 screws holding back cover on.

    • (This may require flipping the monitor over and shaking the screws loose once they're already unscrewed)

  2. Acer AL1714 Video Display Board: étape 2, image 1 de 3 Acer AL1714 Video Display Board: étape 2, image 2 de 3 Acer AL1714 Video Display Board: étape 2, image 3 de 3
    • Take the edge tool or a metal ruler and insert it into the bezel.

    • Apply pressure and push down.

    • Do the same to the right side.

    • Once the side of the bezel facing you is decoupled, take the back cover and pry it loose.

  3. Acer AL1714 Video Display Board: étape 3, image 1 de 3 Acer AL1714 Video Display Board: étape 3, image 2 de 3 Acer AL1714 Video Display Board: étape 3, image 3 de 3
    • Remove the Flat Flex Cable from the Power Supply board located under the metal cage.

    • Pull the cord back and out of the way.

    • (It may be stuck down with adhesive)

  4. Acer AL1714 Video Display Board: étape 4, image 1 de 3 Acer AL1714 Video Display Board: étape 4, image 2 de 3 Acer AL1714 Video Display Board: étape 4, image 3 de 3
    • Unscrew the cord anchors for the VGA port.

    • (Use needle nose pliers if they're too tight for removal by hand)

  5. Acer AL1714 Video Display Board: étape 5, image 1 de 2 Acer AL1714 Video Display Board: étape 5, image 2 de 2
    • Turn the monitor around.

    • Unscrew the 1 screw holding the Flat power Cable cover on.

    • Lift up and remove the Flat Power Cable cover.

    • (Careful: this may be sharp)

  6. Acer AL1714 Video Display Board: étape 6, image 1 de 1
    • Unscrew the 5 screws holding the metal cage on.

  7. Acer AL1714 Video Display Board: étape 7, image 1 de 2 Acer AL1714 Video Display Board: étape 7, image 2 de 2
    • Turn the monitor around.

    • Lift the back of the metal cage slightly.

    • Pull the cage toward self.

    • (Must be careful to free the cover of the VGA port and the power supply input)

  8. Acer AL1714 Video Display Board: étape 8, image 1 de 3 Acer AL1714 Video Display Board: étape 8, image 2 de 3 Acer AL1714 Video Display Board: étape 8, image 3 de 3
    • Lift the Flat Flex Cable holder tabs to release the cables.

    • Lift up on the Flat Flex Cables and bend them out of the working area.

  9. Acer AL1714 Video Display Board: étape 9, image 1 de 3 Acer AL1714 Video Display Board: étape 9, image 2 de 3 Acer AL1714 Video Display Board: étape 9, image 3 de 3
    • Unplug the 4 backlight wires from their ports on the Power Supply Board.

    • (Considering their size, the best way to unplug the backlight wires is by slowly jiggling the wires out of place)

  10. Acer AL1714 Video Display Board: étape 10, image 1 de 1
    • Unscrew the 5 screws holding the Power Supply and Video Display boards.

  11. Acer AL1714 Video Display Board: étape 11, image 1 de 2 Acer AL1714 Video Display Board: étape 11, image 2 de 2
    • Lift and remove the joined boards.

  12. Acer AL1714 Video Display Board: étape 12, image 1 de 3 Acer AL1714 Video Display Board: étape 12, image 2 de 3 Acer AL1714 Video Display Board: étape 12, image 3 de 3
    • Carefully detach the two boards at their connector joint.

    • Replace outlined part.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Christopher Kelly

Membre depuis le 09/25/14

590 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team 1-3, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 1-3, Brown Fall 2014

USFT-BROWN-F14S1G3

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 684