Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the five (5) tabs at the top of the keyboard that are holding it in place
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert the flat part of the Spudger tool into one of the holes in front of the tab
-
Push the tab back so it is no longer holding the keyboard.
-
Repeat this step for all of the tabs
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lay the keyboard upside down
-
Remove any tape that is on the connector with tweezers
-
Gently remove the connector that is on the ribbon cable from the back of the keyboard
-
Your keyboard is now ready to be replaced with a new one
-