Introduction

Upgrade or replace RAM.

Remove the screws on the large panel.
  • Remove the screws on the large panel.

  • Lift up the panel.

Ajouter un commentaire

The RAM slots are located in the corner opposite to the cooling fan.
  • The RAM slots are located in the corner opposite to the cooling fan.

  • To remove existing RAM cards: there are clips holding the sides of each card. Simultaneously spread both right and left clip and the card will pop upward. Then it can easily be pulled out.

  • Slide in the RAM at a 45 degree angle.

  • Press down on the RAM until it snaps into place.

  • A good amount of pressure is needed to snap it in place.

  • Install the RAM in the left (lower) slot before installing RAM in the right (upper) slot

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autre(s) ont terminé cette réparation.

Brad Rollinson

Membre depuis le 29/09/2010

1 089 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 14-39, Forte Fall 2010 Membre de l'équipe Cal Poly, Team 14-39, Forte Fall 2010

CPSU-FORTE-F10S14G39

5 membres

9 tutoriels rédigés

being a novice ram replacement i found this to be exactly what i needed to know thankyou very much.

bruce johnson - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 8

30 derniers jours : 33

Total : 14,627