Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Use this guide to replace the LCD and faceplate of your Acer Aspire E1-470P-6659.

  1. Turn off the laptop and disconnect all device cords.
    • Turn off the laptop and disconnect all device cords.

  2. Flip the laptop over so the bottom is facing you.
    • Flip the laptop over so the bottom is facing you.

  3. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch.
    • Use your finger or a spuger to pull the battery release switch.

  4. OUVRIR TOUS LES ONGLETS

    Kits de mise à jour de RAM pour Mac

    Voir les kits

    Assez de RAM
    pour ouvrir tous les onglets

    Voir les kits
  5. Remove the battery from the laptop. Remove the battery from the laptop. Remove the battery from the laptop.
    • Remove the battery from the laptop.

  6. Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.
    • Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.

  7. On both corners, use tweezers to remove small plastic sticker hiding the screws. Remove screws using Phillips #0 screwdriver. Remove screws using Phillips #0 screwdriver.
    • On both corners, use tweezers to remove small plastic sticker hiding the screws.

    • Remove screws using Phillips #0 screwdriver.

  8. Turn the laptop over and open it up. Using a prying tool, run along all edges of the display to pry the front face plate from the cover. Use your fingers to pull the LCD panel and faceplate from the backing.
    • Turn the laptop over and open it up.

    • Using a prying tool, run along all edges of the display to pry the front face plate from the cover.

    • Use your fingers to pull the LCD panel and faceplate from the backing.

  9. LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display. Carefully peel tape away from cable lead and separate cable from LCD panel. Carefully peel tape away from cable lead and separate cable from LCD panel.
    • LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display.

    • Carefully peel tape away from cable lead and separate cable from LCD panel.

  10. Remove the LCD Panel and faceplate from the device.
    • Remove the LCD Panel and faceplate from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joel Humes

Membre depuis le 22/10/2018

133 Réputation

1 tutoriel rédigé

Équipe

UC Davis, Team S4-G5, Lore Fall 2018 Membre de l'équipe UC Davis, Team S4-G5, Lore Fall 2018

UCD-LORE-F18S4G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 12

Total : 189