Réparez vos affaires Communauté Boutique

Acer Aspire E1-531-2438 Keyboard Replacement

Introduction

Keyboard mistyping, keys not working, or keys jammed? This guide shows how to remove the keyboard on an Acer Aspire E1-531-2438.

Ce dont vous avez besoin

  1. Acer Aspire E1-531-2438 Keyboard Replacement, Battery: étape 1, image 1 de 2 Acer Aspire E1-531-2438 Keyboard Replacement, Battery: étape 1, image 2 de 2

    • Unplug and power down the device before removing the battery.

    • Turn the device over so the back side is facing up.

    • Using a spudger, slide the orange latch to the right. This will release the battery, which should pop up from the device.

    • Use two hands tilt the side of the battery closest to the orange latch upward as shown in the images.

    Modifier

  2. Acer Aspire E1-531-2438 Keyboard Replacement: étape 2, image 1 de 1

    • Tilt the side of the battery closest to the orange latch upward.

    • Lift the battery up and out of the device.

    Modifier

  3. Acer Aspire E1-531-2438 Keyboard Replacement, Hard Drive: étape 3, image 1 de 2 Acer Aspire E1-531-2438 Keyboard Replacement, Hard Drive: étape 3, image 2 de 2

    • Using a Phillips #0 screwdriver, remove the two 9mm screws on the access panel.

    Modifier

  4. Acer Aspire E1-531-2438 Keyboard Replacement: étape 4, image 1 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 4, image 2 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 4, image 3 de 3

    • Using the indentation, pry open the access panel with your fingers or a spudger.

    • Remove the access panel to expose the hard drive, WiFi chip, and RAM modules.

    Modifier

  6. Acer Aspire E1-531-2438 Keyboard Replacement: étape 5, image 1 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 5, image 2 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 5, image 3 de 3

    • Grip the plastic tab on the hard drive, then pull to the left to unplug the drive from its socket.

    • Once free from the socket, lift the hard drive up and out of the device.

    Modifier

  7. Acer Aspire E1-531-2438 Keyboard Replacement, Keyboard: étape 6, image 1 de 3 Acer Aspire E1-531-2438 Keyboard Replacement, Keyboard: étape 6, image 2 de 3 Acer Aspire E1-531-2438 Keyboard Replacement, Keyboard: étape 6, image 3 de 3

    • Using a Phillips #0 screwdriver, remove all of the following screws:

    • Fifteen 9mm screws

    • One 6mm screw

    • Three 3.5mm screws

    Modifier

  8. Acer Aspire E1-531-2438 Keyboard Replacement: étape 7, image 1 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 7, image 2 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 7, image 3 de 3

    • Remove the optical drive by sliding it out of its slot on the side of the laptop.

    Modifier

  9. Acer Aspire E1-531-2438 Keyboard Replacement: étape 8, image 1 de 2 Acer Aspire E1-531-2438 Keyboard Replacement: étape 8, image 2 de 2

    • Using a plastic opening tool, pry along the seam running the perimeter of the laptop to separate the bottom case from the palmrest assembly.

    • Flip the device over and open the laptop so that the keyboard is visible.

    • Lift up the palmrest assembly just far enough to access the connectors underneath.

    Modifier

  10. Acer Aspire E1-531-2438 Keyboard Replacement: étape 9, image 1 de 2 Acer Aspire E1-531-2438 Keyboard Replacement: étape 9, image 2 de 2

    • Using a pair of tweezers, disconnect the small white ribbon cable from the connector near the left side of the device.

    • Disconnect the large black ribbon cable near the middle of the device. Gently pull on the cable away from you.

    Modifier

  11. Acer Aspire E1-531-2438 Keyboard Replacement: étape 10, image 1 de 2 Acer Aspire E1-531-2438 Keyboard Replacement: étape 10, image 2 de 2

    • Lift and remove the palmrest assembly and the attached keyboard.

    Modifier

  12. Acer Aspire E1-531-2438 Keyboard Replacement: étape 11, image 1 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 11, image 2 de 3 Acer Aspire E1-531-2438 Keyboard Replacement: étape 11, image 3 de 3

    • Using a spudger, release the keyboard by prying at the indicated points.

    • Remove the keyboard from the palmrest assembly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Jakob Rinkus

Membre depuis le 03/21/19

965 Réputation

7 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

UMass Dartmouth, Team S8-G2, Bailey Spring 2019 Membre de l'équipe UMass Dartmouth, Team S8-G2, Bailey Spring 2019

UMASSD-BAILEY-S19S8G2

3 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 14

Total : 1,828