Pièces

Aucune pièce nécessaire.

Vidéo d'introduction

Grab a spudger and work your way around the outer edge of the screen
  • Grab a spudger and work your way around the outer edge of the screen

  • Lean the screen all the way back to remove the plastic frame from the hinges at the bottom

Ajouter un commentaire

Unscrew the 4 screws around the edge of the screen
  • Unscrew the 4 screws around the edge of the screen

  • Lean the screen all the way forward on to the keyboard

Ajouter un commentaire

  • Peal up the sticky tape next to the screen connector

  • Pull the connector down carefully away from the screen and disconnect it

Ajouter un commentaire

  • connect the new screen and screw back in place

  • Turn on the screen to test before putting the screen frame back on

  • Tilt the screen all the way back and push the frame back on hinges 1st.

  • Finally lean the laptop on its edge and clip the back on the hinges back in place.

Ajouter un commentaire

Ligne d'arrivée

Nick Myers

Membre depuis le 15/04/2018

329 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 6

Total : 25