Introduction

The first step will be to remove all the screws from the back cover of the device. Then we will remove the back cover. Next, we will remove the screw holding the battery in place. Once that is complete the battery will be unplugged and removed. These steps will be repeated in reverse to put everything back together.

Remove all 18 marked screws (2.12 mm) using a Phillips #1 Screwdriver.
  • Remove all 18 marked screws (2.12 mm) using a Phillips #1 Screwdriver.

Ajouter un commentaire

Use the spudger to slowly work your way around the perimeter starting at the marked location to pop the bottom cover off.
  • Use the spudger to slowly work your way around the perimeter starting at the marked location to pop the bottom cover off.

Ajouter un commentaire

  • Remove the 1 marked screw (3.3 mm) holding the battery in place using a Phillips #1 Screwdriver.

Ajouter un commentaire

  • Unplug the marked plug from the motherboard and this will complete the removal of the battery.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Daniel Bates

Membre depuis le 29/01/2018

154 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 20

Total : 103