Aller au contenu principal

Introduction

In this guide, you will be replacing the power jack, which is independently secured without the use of any internal screws.

Pièces

Aucune pièce spécifiée.

  1. Use a Phillips #1 screwdriver to remove all eighteen 2.12 mm screws from the back plate of your Acer Aspire.
    • Use a Phillips #1 screwdriver to remove all eighteen 2.12 mm screws from the back plate of your Acer Aspire.

  2. Use the spudger to remove the back plate in the highlighted area to carefully pop out the back plate. Use the spudger to remove the back plate in the highlighted area to carefully pop out the back plate.
    • Use the spudger to remove the back plate in the highlighted area to carefully pop out the back plate.

  3. Unplug the power jack from the receptor port on the motherboard, highlighted in red. Remove the power jack from designated area on the side of the computer, highlighted in orange.
    • Unplug the power jack from the receptor port on the motherboard, highlighted in red.

    • Remove the power jack from designated area on the side of the computer, highlighted in orange.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Joey Freeman

Membre depuis le 29/01/2018

224 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 117