Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Remove the back panel by unscrewing all marked 3mm screws with a T6 Torx screwdriver. Remove these screws with a T6 Torx screwdriver, but note that these feet screws are 4mm in length.
    • Remove the back panel by unscrewing all marked 3mm screws with a T6 Torx screwdriver.

    • Remove these screws with a T6 Torx screwdriver, but note that these feet screws are 4mm in length.

  2. Unscrew the marked 2mm screws with a Phillips #01 screwdriver. Remove the fan by disconnecting the marked tabs.
    • Unscrew the marked 2mm screws with a Phillips #01 screwdriver.

    • Remove the fan by disconnecting the marked tabs.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Remove the marked 2mm screw with a Phillips #01 screwdriver.
    • Remove the marked 2mm screw with a Phillips #01 screwdriver.

  5. Remove the hard drive by pulling it away horizontally from its connection.
    • Remove the hard drive by pulling it away horizontally from its connection.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicholas Wise

Membre depuis le 14/02/2018

595 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S2-G6, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S2-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S2G6

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 12

30 derniers jours : 62

Total : 354