Introduction

The keyboard may be easily replaced if a key or keys no longer works. It is accessible without removing the back cover of the computer.

Use the pointed end of the spudger to slide the battery lock until the battery pops loose.
  • Use the pointed end of the spudger to slide the battery lock until the battery pops loose.

Ajouter un commentaire

Slide the battery out of the battery slot.
  • Slide the battery out of the battery slot.

Ajouter un commentaire

  • Remove the two 6mm PH1 screws from the bottom of the laptop.

Ajouter un commentaire

  • Use the spudger, push the two tabs, located in the battery slot, through their slots to release the keyboard.

    • Do this with the computer slightly open for ease.

Ajouter un commentaire

  • Open the laptop.

  • Start top of the keyboard and use the opening tool to pop the remaining tabs around the keyboard loose.

  • The keyboard can be flipped onto its face once removed.

Ajouter un commentaire

  • Use the spudger and slide the grey tabs on either side of the keyboard wires away from the white plastic.

Ajouter un commentaire

  • Disconnect the keyboard by pulling the blue tape on the wire strip.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lakbira Sheffield

Membre depuis le 29/01/2018

583 Réputation

4 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 5

Total : 27