Introduction

The RAM may be responsible for slow or non-existent memory. This guide shows how to replace the RAM.

  1. Use the pointed end of the spudger to slide the battery lock until the battery pops loose.
    • Use the pointed end of the spudger to slide the battery lock until the battery pops loose.

  2. Slide the battery out of the battery slot. Slide the battery out of the battery slot.
    • Slide the battery out of the battery slot.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Unscrew the two RAM 6mm cover screws.
    • Unscrew the two RAM 6mm cover screws.

    • Use a PH1 screw bit.

  5. Pop the RAM cover off.
    • Pop the RAM cover off.

    • Use the plastic opening tool.

  6. Use either the spudger or your fingers to pinch the clips away from the RAM chip on either side of each chip. The chip should pop up. The clips break easily.
    • Use either the spudger or your fingers to pinch the clips away from the RAM chip on either side of each chip.

    • The chip should pop up.

    • The clips break easily.

    • Slide the RAM memory chips out of the slots.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lakbira Sheffield

Membre depuis le 29/01/2018

583 Réputation

4 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 61