Réparez vos affaires Communauté Boutique

Acer Aspire V5-572, V5-572G HDD Replacement

Introduction

Acer Aspire - V5-572, V5-572G

Follow this guide if you want to change / upgrade your HDD (Hard Disk Drive) or install SSD (Solid State Drive).


Ce dont vous avez besoin

Vidéo d'introduction

  1. Acer Aspire V5-572, V5-572G HDD Replacement, Bottom Cover: étape 1, image 1 de 1

    • Switch-off the Laptop.

    • Remove the seventeen Philips #0 screws.

    Modifier

  2. Acer Aspire V5-572, V5-572G HDD Replacement: étape 2, image 1 de 1

    • If there is a plastic storage tray in the laptop, remove it.

    Modifier

  4. Acer Aspire V5-572, V5-572G HDD Replacement: étape 3, image 1 de 3 Acer Aspire V5-572, V5-572G HDD Replacement: étape 3, image 2 de 3 Acer Aspire V5-572, V5-572G HDD Replacement: étape 3, image 3 de 3

    • Starting from the SD Memory Card hole, start prying between the top and bottom cases.

    • Use plastic tools to avoid damaging the cover.

    • Remove the bottom case.

    Modifier

  5. Acer Aspire V5-572, V5-572G HDD Replacement: étape 4, image 1 de 1

    • Disconnect the battery immediately for a safer repair.

    • Pull the battery connector away from the hard drive to disconnect it.

    Modifier

  6. Acer Aspire V5-572, V5-572G HDD Replacement, HDD: étape 5, image 1 de 3 Acer Aspire V5-572, V5-572G HDD Replacement, HDD: étape 5, image 2 de 3 Acer Aspire V5-572, V5-572G HDD Replacement, HDD: étape 5, image 3 de 3

    • Disconnect the SATA Cable from the Mother Board.

    • Take out the HDD and remove the SATA cable from it.

    • Now you can change / upgrade your HDD.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

ZFix

Membre depuis le 12/09/13

191 278 Réputation

330 tutoriels rédigés

Badges: 35

+ 32 badges supplémentaires

Équipe

Master Techs Membre de l'équipe Master Techs

Community

322 membres

2 528 tutoriels rédigés

7 commentaires

Thank you very much for the tutorial, it was a 12 minute job ☺️And extremely pleased with the new ssd its incredible

Best Regards

Luckystyx - Réponse

Thank you so much for the extremely easy tutorial and it definitely only took 2 minutes longer (12 minutes)

Your site is invaluable, Keep up the great work and all that you do,

5 star rating for you guys..

Kindest Regards

@Styx

Luckystyx - Réponse

So the original hdd came in with the win 7 and it was later upgraded to win 10 for free. If i change it to ssd would i be able to get on it my original copy of win 7 and will it upgrade to win 10?

ashmir - Réponse

ashmir, you just clone your HDD with a free software such as Macrium Reflect and don’t need to worry about installing everything from zero!!!

Miguel Rodríguez - Réponse

Thank you for the tutorial.

But need a clarification. If i have a faulty hard disc it starts up but it freezes after 20 minutes.

Is it still possible to clone it.

Also if i change the hard drive do I need to install any software or the bios all over again.

Your inputs will be appreciated.

olatunji.jimoh - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 6

7 derniers jours : 26

30 derniers jours : 120

Total : 17,673