Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 6mm JIS #0 screws from either side of the hinges.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the eight 4mm JIS #0 screws from the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert an opening pick between the back panel and the sides of the computer to begin lifting the back off.
-
After the sides have been lifted, use the opening tool to finish opening the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two JIS #0 screws that connect the battery to the rest of the laptop.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the white tab connected to the battery out of the black tab that connects to the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the LCD cable from the motherboard by removing the tape on the LCD connector, then gently pulling out the ribbon cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the LCD cable from the motherboard by gently pulling on the cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the trackpad by pulling on the trackpad connector cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the daughterboard from the motherboard by gently removing the daughterboard cable from the motherboard connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the electrical tape covering the screw that holds the Wi-Fi card in place.
-
Remove the single 4mm JIS #0 screw that holds the Wi-Fi card in place.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the seven 4mm JIS #0 screws that hold the motherboard in place.
-
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.