Pièces

Aucune pièce nécessaire.

Make sure the laptop is turned off and unplugged before starting.
  • Make sure the laptop is turned off and unplugged before starting.

  • Unscrew the thirteen 10mm screws on the back of the computer using the Phillips #0 screwdriver.

  • Using the spudger or other prying tool, gently pry the back off of the device.

  • Be sure not to pry too hard as it may result in snapping the back plate.

Ajouter un commentaire

Unscrew the two 5mm battery screws using the Phillips #0 screwdriver.
  • Unscrew the two 5mm battery screws using the Phillips #0 screwdriver.

Ajouter un commentaire

  • Gently lift the battery up and away from the hooks on the bottom of the device keeping the battery in place.

  • Be sure the battery is away from the clips before pulling away so as not to break the clips.

Ajouter un commentaire

  • Detach the connecting cable from the motherboard by pulling away.

  • Remove the battery from the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jacob Kahn

Membre depuis le 17/10/2017

225 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team S6-G4, Rockett Fall 2017 Membre de l'équipe UMass Dartmouth, Team S6-G4, Rockett Fall 2017

UMASSD-ROCKETT-F17S6G4

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 59