Aller au contenu principal

Introduction

Picks up after the back pannel and battery guides, this will show you how to remove and replace the rear facing camera incase of failure. This may need to be replaced in cases of damage to the device.

Pièces

Aucune pièce spécifiée.

  1. Place the tablet  face down on a flat surface with the charger facing toward you.
    • Place the tablet face down on a flat surface with the charger facing toward you.

  2. Use a plastic opening tool to pry the back panel off of the device.
    • Use a plastic opening tool to pry the back panel off of the device.

    • Be careful to not use the plastic opening tool near the charging dock or any media ports.

  3. Lift the retaining flap fastening the ribbon cord to the motherboard using a plastic opening tool.
    • Lift the retaining flap fastening the ribbon cord to the motherboard using a plastic opening tool.

  4. Remove the ribbon cord from its slot using a plastic opening tool.
    • Remove the ribbon cord from its slot using a plastic opening tool.

  5. Remove the rear-facing camera from its slot and pose for a camera shot.
    • Remove the rear-facing camera from its slot and pose for a camera shot.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adam Fierce

Membre depuis le 15/09/2016

418 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 18-4, Blackwell Fall 2016 Membre de l'équipe USF Tampa, Team 18-4, Blackwell Fall 2016

USFT-BLACKWELL-F16S18G4

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 311