Introduction

The magnet is located in the water reservoir of the brewer and functions as a water level sensor that detects when the coffee maker needs to be refilled with water.

Before starting the repair, make sure that the device is unplugged and the water reservoir is empty.
  • Before starting the repair, make sure that the device is unplugged and the water reservoir is empty.

  • Detach the water reservoir from the brewer by lifting the reservoir vertically from the device.

Ajouter un commentaire

The magnet is located in the bottom of the reservoir.
  • The magnet is located in the bottom of the reservoir.

  • Remove the grey lid from the top of the reservoir.

  • Insert your hand and manually realign the magnet to where it slides freely in its enclosed area.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Alexander Vo

Membre depuis le 11/01/2013

85 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 20-2, Maness Winter 2013 Membre de l'équipe Cal Poly, Team 20-2, Maness Winter 2013

CPSU-MANESS-W13S20G2

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 16

30 derniers jours : 88

Total : 10,104