Introduction
If the cloth clamp is not moving properly, the adjustment knob may not be on properly.
-
-
Press down on the adjustment knob, and turn it to the left.
-
Take the knob out of the Buttonholer.
-
-
-
-
Place the adjustment knob back into the device.
-
Turn the adjustment knob to the right.
-
Keep turning until the clamp moves back and forth. If the plate is moving only side to side, you may need to fix the spring in the fork arm.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
USF Tampa, Team 3-6, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 3-6, Brown Fall 2014
USFT-BROWN-F14S3G6
5 membres
8 tutoriels rédigés
