Réparez vos affaires Communauté Boutique

Air Hog Smash Bots Radio Receiver Replacement

Introduction

This outline will guide you to replace the radio receiver, if it happens to break will in use. A soldering iron will need to be used for this, directions on how to solder can be found here.

Ce dont vous avez besoin

  1. Air Hog Smash Bots Radio Receiver Replacement, Batteries: étape 1, image 1 de 1

    • Using the Phillips #0 screwdriver to remove the 8 mm screw.

    Modifier

  2. Air Hog Smash Bots Radio Receiver Replacement: étape 2, image 1 de 1

    • Lift and slide the batter cover away from the tab holding it in place at the bottom.

    Modifier

  3. Air Hog Smash Bots Radio Receiver Replacement: étape 3, image 1 de 1

    • Remove the 3 AAA batteries.

    Modifier

  4. Air Hog Smash Bots Radio Receiver Replacement, External Casing: étape 4, image 1 de 2 Air Hog Smash Bots Radio Receiver Replacement, External Casing: étape 4, image 2 de 2

    • Using a Phillip #0 screwdriver to remove the eight 8 mm screws.

    Modifier

  6. Air Hog Smash Bots Radio Receiver Replacement: étape 5, image 1 de 2 Air Hog Smash Bots Radio Receiver Replacement: étape 5, image 2 de 2

    • Remove the upper armor of the Smash Bot.

    Modifier

  7. Air Hog Smash Bots Radio Receiver Replacement: étape 6, image 1 de 1

    • Hold the upper body and slide out the bottom half of the Smash Bot.

    • The motor extends from the lower-body into the upper-body. Be careful to not damage the motor.

    Modifier

  8. Air Hog Smash Bots Radio Receiver Replacement: étape 7, image 1 de 1

    • Peel back the four decal stickers that hold the front and back of the bot together.

    Modifier

  9. Air Hog Smash Bots Radio Receiver Replacement: étape 8, image 1 de 2 Air Hog Smash Bots Radio Receiver Replacement: étape 8, image 2 de 2

    • Use the plastic opening tool to pry the front and back of the lower body apart.

    • Carefully remove the back of the bot from the front.

    Modifier

  10. Air Hog Smash Bots Radio Receiver Replacement, Radio Receiver: étape 9, image 1 de 2 Air Hog Smash Bots Radio Receiver Replacement, Radio Receiver: étape 9, image 2 de 2

    • Use the Phillips 0 screwdriver to remove two 4.75mm screws.

    Modifier

  11. Air Hog Smash Bots Radio Receiver Replacement: étape 10, image 1 de 2 Air Hog Smash Bots Radio Receiver Replacement: étape 10, image 2 de 2

    • Use the soldering workstation to remove the five wires. Directions on how to solder can be found here.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Brittany Frecker

Membre depuis le 02/08/16

542 Réputation

4 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

IUPUI, Team 1-1, Baechle Spring 2016 Membre de l'équipe IUPUI, Team 1-1, Baechle Spring 2016

IUPUI-BAECHLE-S16S1G1

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 6

30 derniers jours : 9

Total : 283