Introduction
Use this guide to replace the volume knob and pitch bender if either of the knobs break, stop working, or get stuck and won't move.
Ce dont vous avez besoin
-
-
-
Rotate the device 180 degrees, so that the motherboard is closest to you.
-
Remove the ribbon cable connecting the knobs to the mother board by gently wiggling and pulling it away from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.