Aller au contenu principal

Introduction

In this guide, we will be showing you how to remove and replace the Base Panel.

Pièces

Aucune pièce spécifiée.

  1. Close the display and turn the computer over.
    • Close the display and turn the computer over.

    • Make sure PC is turned off!

  2. Loosen the captive screws that secure the base panel to the computer base.
    • Loosen the captive screws that secure the base panel to the computer base.

  3. Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.
    • Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.

  4. Slide and remove the base panel from the computer base.
    • Slide and remove the base panel from the computer base.

  5. Disconnect the Battery cable from the system board.
    • Disconnect the Battery cable from the system board.

    • Turn the computer over.

    • Press and hold power button for 5 seconds to ground the system board.

  6. Connect the battery cable to the system board.
    • Connect the battery cable to the system board.

  7. Tighten the captive screws that secure the base panel to the computer base.
    • Tighten the captive screws that secure the base panel to the computer base.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Terrence15

Membre depuis le 18/12/2017

73 327 Réputation

442 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

38 membres

1 962 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 11

Total : 531