Alienware 17 R2 Keyboard Replacement

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Ce dont vous avez besoin

Étape 1 WARNING

Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Traduire

Étape 2 Close the Display

Alienware 17 R2 Keyboard Replacement, Close the Display: étape 2, image 1 de 1

Close the display and turn the computer over.
Make sure PC is turned off!

Traduire

Étape 3 Loosen Screws

Alienware 17 R2 Keyboard Replacement, Loosen Screws: étape 3, image 1 de 1

Loosen the captive screws that secure the base panel to the computer base.

Traduire

Étape 4 Releasing Tabs

Alienware 17 R2 Keyboard Replacement, Releasing Tabs: étape 4, image 1 de 1

Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.

Traduire

Étape 5 Remove Base Panel

Alienware 17 R2 Keyboard Replacement, Remove Base Panel: étape 5, image 1 de 1

Slide and remove the base panel from the computer base.

Traduire

Étape 6 Disconnect Battery Cable

Alienware 17 R2 Keyboard Replacement, Disconnect Battery Cable: étape 6, image 1 de 1

Disconnect the Battery cable from the system board.

Traduire

Étape 7 Turn PC Over

Turn the computer over.

Traduire

Étape 8 Power

Press and hold power button for 5 seconds to ground the system board.

Traduire

Étape 9 Battery Cable

Alienware 17 R2 Keyboard Replacement, Battery Cable: étape 9, image 1 de 1

Connect the battery cable to the system board.

Traduire

Étape 10 Tighten Screws

Alienware 17 R2 Keyboard Replacement, Tighten Screws: étape 10, image 1 de 1

Tighten the captive screws that secure the base panel to the computer base.

Traduire

Étape 11 Disconnecting the Touch Pad-Cable

WARNING : Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
Make sure the base panel is removed.
Make sure palm rest is removed.
Lift the latches and disconnect the touch-pad cable and the status-light cable from the power-button board.

Traduire

Étape 12 Peel off the Cables

Alienware 17 R2 Keyboard Replacement, Peel off the Cables: étape 12, image 1 de 1

Note the touch-pad cable and status-light cable routing and peel off the cables from the keyboard bracket.

Traduire

Étape 13 Screw Removal

Alienware 17 R2 Keyboard Replacement, Screw Removal: étape 13, image 1 de 1

Remove the screws that secure the keyboard bracket to the palm-rest assembly.

Traduire

Étape 14 Sliding the Cables

Slide the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable through the slot on the keyboard bracket.

Traduire

Étape 15 Lifting the Keyboard Bracket

Alienware 17 R2 Keyboard Replacement, Lifting the Keyboard Bracket: étape 15, image 1 de 1

Lift the keyboard bracket off the palm-rest assembly.

Traduire

Étape 16

Remove the screws that secure the keyboard to the palm rest assembly.

Traduire

Étape 17 Releasing the Tabs

Alienware 17 R2 Keyboard Replacement, Releasing the Tabs: étape 17, image 1 de 1

Release the tabs that secure the keyboard to the palm-rest assembly.

Traduire

Étape 18 Lifting the Keyboard

Alienware 17 R2 Keyboard Replacement, Lifting the Keyboard: étape 18, image 1 de 1

Slide and lift the keyboard along with the cables off the palm-rest assembly.

Traduire

Étape 19 Inserting the New Keyboard

Slide the new keyboard under the tabs on the palm-rest assembly.

Traduire

Étape 20 Screw Alignment

Alienware 17 R2 Keyboard Replacement, Screw Alignment: étape 20, image 1 de 1

Align the screw holes on the keyboard with the screw holes on the palm-rest assembly.

Traduire

Étape 21 Screw Replacement

Replace the screws that secure the keyboard to the palm-rest assembly.

Traduire

Étape 22 Routing through the Bracket

Route the keyboard cable, keyboard-backlight cable, marco-keys cable and marco-keys backlight cable through the slots on the keyboard bracket.

Traduire

Étape 23 Screw Alignment

Align the screw holes on the keyboard bracket with the screw holes on the palm-rest assembly.

Traduire

Étape 24 Replace the Screws

Alienware 17 R2 Keyboard Replacement, Replace the Screws: étape 24, image 1 de 1

Replace the screws that secure the keyboard bracket to the palm-rest assembly.

Traduire

Étape 25 Adhering the Cable

Adhere the touch-pad cable and status-light cable to the keyboard bracket.

Traduire

Étape 26 Securing the Cables

Slide the touch-pad cable and the status-light cable into their respective connectors on the power-button board and press down the latches to secure the cables.

Traduire