Pièces

Aucune pièce nécessaire.

WARNING :  Before working inside your computer, read the  safety information that shipped with your computer and  follow the steps in Before Working Inside Your Computer.  After working inside your computer, follow the instructions  in After Working Inside Your Computer.
  • WARNING : Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Lift the latches and disconnect the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable from the system board.

Ajouter un commentaire

Remove the screws that secure the palm-rest assembly to the computer base.
  • Remove the screws that secure the palm-rest assembly to the computer base.

Ajouter un commentaire

  • Lift the computer base slightly and push the palm-rest assembly through the slot on the computer base to release the tabs on the palm-rest assembly.

Ajouter un commentaire

  • Turn the computer over and open the display as far as possible.

Ajouter un commentaire

  • Using a plastic scribe, pry up along the edges of the palm rest assembly.

Ajouter un commentaire

  • Gently lift the palm-rest assembly and turn it over.

Ajouter un commentaire

  • Peel the tape that secures the power-button cable to the system board.

Ajouter un commentaire

  • Disconnecting the power-board cable from the system board.

Ajouter un commentaire

  • Lift the palm-rest assembly off the computer base.

Ajouter un commentaire

  • Remove the power-button board.

Ajouter un commentaire

  • Remove the status-light board.

Ajouter un commentaire

  • Remove the keyboard bracket.

Ajouter un commentaire

  • Remove the touch pad.

Ajouter un commentaire

  • Replace the touch pad.

  • Replace the keyboard.

  • Replace the status-light board.

  • Replace the power-button board.

Ajouter un commentaire

  • Connect the power-button cable to the system board.

Ajouter un commentaire

  • Adhere the tape that secures the power button cable to the system board.

Ajouter un commentaire

  • Slide the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable through the slot on the computer base.

Ajouter un commentaire

  • Align the palm-rest assembly on the computer base and snap it into place.

Ajouter un commentaire

  • Close the display and turn the computer over.

Ajouter un commentaire

  • Replace the screws that secure the palm-rest assembly to the computer base.

Ajouter un commentaire

  • Slide the keyboard cable, keyboard-backlight cable, macro-keys cable and macro-keys backlight cable into their respective connectors and press down the latches to secure the cables to the system board.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Terrence15

Membre depuis le 18/12/2017

69 311 Réputation

444 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 5

Total : 51