Introduction

How to remove and replace the Base Cover.

Pièces

Aucune pièce nécessaire.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn the computer over.

  2. Loosen the eight captive screws that secure the base cover to the computer base.
    • Loosen the eight captive screws that secure the base cover to the computer base.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Lift the base cover off the computer base.
    • Lift the base cover off the computer base.

  5. Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.
    • Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.

  6. Tighten the eight screws that secure the base cover to the computer base.
    • Tighten the eight screws that secure the base cover to the computer base.

Ligne d'arrivée

2 autre(s) ont terminé cette réparation.

darrius

Membre depuis le 26/03/2018

5 072 Réputation

30 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

925 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 43