Réparez vos affaires Communauté Boutique

Altec Lansing BoomJacket 2 Motherboard Replacement

Introduction

Replacing the motherboard can help with bluetooth connection and control panel buttons issues.

Ce dont vous avez besoin

  1. Altec Lansing BoomJacket 2 Motherboard Replacement, Altec Lansing BoomJacket 2 Disassembly: étape 1, image 1 de 2 Altec Lansing BoomJacket 2 Motherboard Replacement, Altec Lansing BoomJacket 2 Disassembly: étape 1, image 2 de 2

    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

    Traduire

  2. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 2, image 1 de 2 Altec Lansing BoomJacket 2 Motherboard Replacement: étape 2, image 2 de 2

    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

    Traduire

  3. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 3, image 1 de 1

    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

    Traduire

  4. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 4, image 1 de 2 Altec Lansing BoomJacket 2 Motherboard Replacement: étape 4, image 2 de 2
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

    Traduire

  6. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 5, image 1 de 1

    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

    Traduire

  7. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 6, image 1 de 1

    • Gently pull apart the front panel from the base of the speaker.

    Traduire

  8. Altec Lansing BoomJacket 2 Motherboard Replacement, Battery: étape 7, image 1 de 1

    • The battery will be in the middle of the speaker when the case is open.

    Traduire

  9. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 8, image 1 de 1

    • Pull firmly from both sides of the pin to disconnect the battery cable from the motherboard.

    • Pull battery up and away from speaker without catching any other components.

    • Motherboards have fragile components and can easily be damaged if they are hit or pulled on while extracting other parts.

    Traduire

  10. Altec Lansing BoomJacket 2 Motherboard Replacement, Motherboard: étape 9, image 1 de 2 Altec Lansing BoomJacket 2 Motherboard Replacement, Motherboard: étape 9, image 2 de 2

    • Disconnect the furthest right hand plug first.

    • Do not pull from the wires. Pull from the white connector.

    Traduire

  11. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 10, image 1 de 1

    • Gently pull the motherboard directly upwards to avoid damage.

    • Be sure to lift slowly.

    Traduire

  12. Altec Lansing BoomJacket 2 Motherboard Replacement: étape 11, image 1 de 1

    • Disconnect the remaining connectors from the motherboard.

    • Do not forcefully pull connectors. Pull from the connectors, not from the wires.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

Zach Braaten

Membre depuis le 07/12/18

537 Réputation

4 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

UW Tacoma, Team S1-G4, Cardinal Summer 2018 Membre de l'équipe UW Tacoma, Team S1-G4, Cardinal Summer 2018

UWT-CARDINAL-SU18S1G4

4 membres

4 tutoriels rédigés

Un commentaire

Where is the best place to purchase a motherboard for the Altec Lansing Jacket H20 4?

Kelvin Jasper - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 14

Total : 878