Réparez vos affaires Communauté Boutique

Altec Lansing VersA Smart Motherboard Replacement

Introduction

If you are having various issues with your device, this guide will show you how to remove and replace the motherboard.

Ce dont vous avez besoin

  1. Altec Lansing VersA Smart Motherboard Replacement, External Panels: étape 1, image 1 de 1

    • Remove external rubber cover.

    Traduire

  2. Altec Lansing VersA Smart Motherboard Replacement: étape 2, image 1 de 2 Altec Lansing VersA Smart Motherboard Replacement: étape 2, image 2 de 2

    • Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom.

    • Use a lever motion, push the tool down, lifting the speaker face.

    • Use fingers to grip and remove speaker face.

    • Repeat on reverse side to remove the second speaker face.

    Traduire

  3. Altec Lansing VersA Smart Motherboard Replacement: étape 3, image 1 de 2 Altec Lansing VersA Smart Motherboard Replacement: étape 3, image 2 de 2

    • Orient speaker so volume buttons are facing away from you, and Bluetooth and power buttons are on the left-hand side.

    • Remove the seven 14mm screws using the Phillips #1 screwdriver.

    Traduire

  5. Altec Lansing VersA Smart Motherboard Replacement: étape 4, image 1 de 1

    • Reorient speaker so Bluetooth and power buttons are now on the right-hand side.

    • Separate the two panels along the crease.

    • Blue plastic opening tool may be needed to separate panels.

    • Remove the panel with no buttons to expose internal area of the device.

    • Motherboard and all internal components are under this panel.

    Traduire

  6. Altec Lansing VersA Smart Motherboard Replacement, Motherboard: étape 5, image 1 de 1

    • Remove the five wiring attachments (for the volume board, bluetooth board, speakers, and microUSB) from their connection to the motherboard by pulling slightly.

    Traduire

  7. Altec Lansing VersA Smart Motherboard Replacement: étape 6, image 1 de 2 Altec Lansing VersA Smart Motherboard Replacement: étape 6, image 2 de 2

    • Remove the two 9mm screws holding the motherboard in place using the Torx T5 screwdriver.

    Traduire

  8. Altec Lansing VersA Smart Motherboard Replacement: étape 7, image 1 de 1

    • Remove the motherboard.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Kendra Pennington

Membre depuis le 09/10/18

118 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

University of Alabama, Team S1-G3, Bedsole Fall 2018 Membre de l'équipe University of Alabama, Team S1-G3, Bedsole Fall 2018

UA-BEDSOLE-F18S1G3

3 membres

6 tutoriels rédigés

Un commentaire

Where can you buy replacement PCBS for ALTEC products?

Kelly Raile - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 8

Total : 327