Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the plastic opening tool to gently lift the plastic protector from the screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After the protector has been removed, use your hands to gently remove the taped-in rubber foot from device.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully peel off the bottom pad to expose the fastening screws.
-
Remove three silver 1.4 T5 Torx screws on the top row.
-
Remove one green 1mm T5 Torx screw in the middle.
-
Remove a black 1.5mm T5 screw.
-
Remove three green 1mm T5 screws from the bottom row.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After the screws are removed, grip the front panel and separate the front from the back. This will expose the inside of the device.
-
Use tweezers or your hands to carefully disconnect the red wires connecting the speakers to the power supply board.
-
Lay the front section flat, with the screen down.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove two 1mm T5 Torx screws.
-
Once the screws have been removed, you can easily remove the camera from the device.
-
Un commentaire
Can not reset amazon echo show model MW46WB tried everything any suggestions