Aller au contenu principal

Introduction

This device has a 2 megapixel Rear-facing camera and this guide will help you locate and replace this part.

Pièces

Aucune pièce spécifiée.

  1. Insert the plastic opening tool behind the rear case to free the clips holding the case together. Work your way around the device to free all the clips. Work your way around the device to free all the clips.
    • Insert the plastic opening tool behind the rear case to free the clips holding the case together.

    • Work your way around the device to free all the clips.

  2. There are an additional nine clips surrounding the battery area. Place the plastic tool into the clips and lift to disconnect them.
    • There are an additional nine clips surrounding the battery area. Place the plastic tool into the clips and lift to disconnect them.

    • Once all clips have been released, the back case can be pulled free to reveal the inside of the device.

  3. Use a nylon spudger to unclip the connection from the motherboard.
    • Use a nylon spudger to unclip the connection from the motherboard.

  4. Unscrew the two screws  using a T5 screwdriver. The camera lens are sensitive. Be careful when removing and handling camera.
    • Unscrew the two screws using a T5 screwdriver.

    • The camera lens are sensitive. Be careful when removing and handling camera.

    • Once freed from the screws, gently lift and remove the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Omir Rosado

Membre depuis le 30/09/2016

680 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 4-4, Passmore Fall 2016 Membre de l'équipe USF Tampa, Team 4-4, Passmore Fall 2016

USFT-PASSMORE-F16S4G4

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 350