Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

The Kindle Fire HD 7 (4th Generation) uses a 3.7V, Li-ion battery. This guide will help you locate and replace the battery.

  1. Insert the plastic opening tool behind the rear case to free the clips holding the case together. Work your way around the device to free all the clips. Work your way around the device to free all the clips.
    • Insert the plastic opening tool behind the rear case to free the clips holding the case together.

    • Work your way around the device to free all the clips.

  2. There are an additional 9 clips in the center of the case, surrounding the battery.  Insert the plastic tool into the clips and lift to disconnect them.
    • There are an additional 9 clips in the center of the case, surrounding the battery. Insert the plastic tool into the clips and lift to disconnect them.

    • Once all clips have been released, the back case can be pulled free to reveal the inside of the device.

  3. SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone

    SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone
  4. Insert the plastic tool below the battery connecting wires and lift the tool to disconnect the wires from the device. Insert the plastic tool below the battery connecting wires and lift the tool to disconnect the wires from the device.
    • Insert the plastic tool below the battery connecting wires and lift the tool to disconnect the wires from the device.

  5. Insert the tip of the plastic opening tool behind the sides of the battery. Pry the battery apart to release it from the battery compartment. Work along  one side and repeat on the other.
    • Insert the tip of the plastic opening tool behind the sides of the battery.

    • Pry the battery apart to release it from the battery compartment.

    • Work along one side and repeat on the other.

  6. Remove battery from compartment and replace it with a new one.
    • Remove battery from compartment and replace it with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autre(s) ont terminé cette réparation.

Omir Rosado

Membre depuis le 30/09/2016

680 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 4-4, Passmore Fall 2016 Membre de l'équipe USF Tampa, Team 4-4, Passmore Fall 2016

USFT-PASSMORE-F16S4G4

4 membres

5 tutoriels rédigés

Which direction are you placing the prying tool to release the clips; to open it up? With the prying tip facing up to release clips and then use to lift the back up as you move along the edges or face prying tip down to release clips which will then release the back to lift?

Also, using a black case, it’s hard to tell in the pic where exactly these clips are? Can you mark them on a photo?

Thank you! What seems to be an easy task is proving to be a struggle for my 4th Gen 7HD.

ugowhereigo - Réponse

I have just replaced the battery in my wife's Kindle and the clips did not want to let go. I had to warn the back of the case with a hair dryer to get it to flex. The battery was well stuck down and needed a metal pry tool to release it.

Pedro Bedro - Réponse

Replacing this battery looks very doable thanks to these instructions. But I was wondering what the risk is to damaging the LCD in the process? Thanks!

Cary Li - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 5

7 derniers jours : 44

30 derniers jours : 208

Total : 11,548