Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a metal spudger, push down between the edge seals on the base and pry off the base.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the T-10 bit from the iFixit tool kit to unscrew the four 1.4 inch corner screws on top of the first layer.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the black latch by gently prying up with the flat end of the Spudger.
-
Detach the copper tap by pulling it out.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the pointed end of the Spudger to carefully detach the black and white wires from the motherboard.
-
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.