Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Place the plastic opening tool in the space between the rubber and the plastic case of the device.
-
Apply pressure by pushing upward on the case.
-
Separate the bottom square rubber piece from the case using the plastic opening tool until all clips are detached.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the ten J#00 Phillips screws and remove them.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Place your finger on the short edge of the motherboard and lift it to separate it from the plastic case.
-
Annulation : je n'ai pas terminé ce tutoriel.
5 autres ont terminé cette réparation.