Introduction
Use this guide to replace the hook-and-loop sandpaper disc on a Clarke Floor Sander 07163A 2017.
This guide shows the removal of just one disc, but the procedure for the other two discs is identical.
-
-
Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
