Anker Soundcore Flare Mini Motherboard Replacement

Introduction

This guide will show you how to replace the motherboard in the Anker Soundcore Flare Mini A3167.

The motherboard is an essential circuit board in most computers and electronics. The motherboard connects every electronic part of the speaker. This makes it one of the most important components of the device.

Before starting the replacement, make sure the speaker is turned off and is unplugged from the power cord.

Ce dont vous avez besoin

Étape 1 Bottom Cover

Anker Soundcore Flare Mini Motherboard Replacement, Bottom Cover: étape 1, image 1 de 3

Anker Soundcore Flare Mini Motherboard Replacement, Bottom Cover: étape 1, image 2 de 3

Anker Soundcore Flare Mini Motherboard Replacement, Bottom Cover: étape 1, image 3 de 3

The rubber cover of the speaker is glued down.
Use precision tweezers to peel the rubber cover off of the bottom of the speaker.

Modifier

Étape 2

Anker Soundcore Flare Mini Motherboard Replacement: étape 2, image 3 de 3

Remove six 10 mm screws holding the plastic cover in place using a Phillips #000 screwdriver.
Use your hand to pull the plastic cover off the bottom of the speaker.

Modifier

Étape 3 Motherboard

Anker Soundcore Flare Mini Motherboard Replacement, Motherboard: étape 3, image 1 de 3

Anker Soundcore Flare Mini Motherboard Replacement, Motherboard: étape 3, image 2 de 3

Anker Soundcore Flare Mini Motherboard Replacement, Motherboard: étape 3, image 3 de 3

Remove the single 10 mm screw holding the motherboard in place using a Phillips #000 screwdriver.
Lift the motherboard up.
The motherboard is still attached to several wires underneath.

Modifier

Étape 4

Anker Soundcore Flare Mini Motherboard Replacement: étape 4, image 3 de 3

Use precision tweezers to firmly grasp the five power connectors and detach them from the back of the motherboard.
When removing the power connectors, do not pull the wires themselves.
Remove the motherboard from the speaker.