Aller au contenu principal

Apex Digital DTV Converter Box Power supply Board replacement

Ce dont vous avez besoin

  1. Apex Digital DTV Converter Box Power supply Board replacement, Power Board: étape 1, image 1 de 1
    • Unplug your device from the wall outlet.

  2. Apex Digital DTV Converter Box Power supply Board replacement: étape 2, image 1 de 1
    • Remove the screws on the sides and rear. There are two on each side and four on the back.

    • Note: only remove the black ones (the silver ones stay for now). You should have removed eight identical screws by now.

  3. Apex Digital DTV Converter Box Power supply Board replacement: étape 3, image 1 de 1
    • Lift the top cover up and toward you simultaneously. It shouldn't require very much force.

  4. Apex Digital DTV Converter Box Power supply Board replacement: étape 4, image 1 de 1
    • Locate the power board inside the converter box.

    • Circled in red in the picture.

  5. Apex Digital DTV Converter Box Power supply Board replacement: étape 5, image 1 de 1
    • Remove this plug

    • You will need to squeeze the locking lever to release it. don't pull too hard.

    • Circled in red in the picture.

  6. Apex Digital DTV Converter Box Power supply Board replacement: étape 6, image 1 de 1
    • Remove this plug from the main board. It is not detachable from the power board end.

    • Be gentle.

    • Circled in red in the picture

  7. Apex Digital DTV Converter Box Power supply Board replacement: étape 7, image 1 de 1
    • Remove one last cable. This one leads to the front panel

    • Be gentle.

    • Circled in red

  8. Apex Digital DTV Converter Box Power supply Board replacement: étape 8, image 1 de 1
    • Remove the power cord from its slot in the casing. This will make it easier to remove the power board.

    • Circled in blue

  9. Apex Digital DTV Converter Box Power supply Board replacement: étape 9, image 1 de 1
    • Remove the four silver colored philips screws holding the power board in.

    • Marked in pink (eeww)

  10. Apex Digital DTV Converter Box Power supply Board replacement: étape 10, image 1 de 1
    • Lift the power board out. Be careful to not touch the bottom of the power board. even when unplugged, it may still hold a charge.

    • Here is the empty spot.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autres ont terminé cette réparation.

Michel

Membre depuis le 06/18/10

288 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 8,999