Aller au contenu principal

Apple AirPort Extreme Model A1034 Antenna Replacement

Ce dont vous avez besoin

  1. Apple AirPort Extreme Model A1034 Antenna Replacement, Outer Case: étape 1, image 1 de 1
    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

  2. Apple AirPort Extreme Model A1034 Antenna Replacement: étape 2, image 1 de 1
    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

  3. Apple AirPort Extreme Model A1034 Antenna Replacement: étape 3, image 1 de 2 Apple AirPort Extreme Model A1034 Antenna Replacement: étape 3, image 2 de 2
    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

  4. Apple AirPort Extreme Model A1034 Antenna Replacement: étape 4, image 1 de 1
    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

  5. Apple AirPort Extreme Model A1034 Antenna Replacement, Antenna: étape 5, image 1 de 1
    • Remove the two 4mm phillips screws to remove antenna.

  6. Apple AirPort Extreme Model A1034 Antenna Replacement: étape 6, image 1 de 1
    • The circuit board connected to the antenna is attached to the metal case with foam adhesive.

    • Gently peel or cut the foam holding the circuit board with a knife and remove it from the AirPort.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Michael Garcia

Membre depuis le 10/12/11

411 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-15, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 membres

13 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 4,668