Réparez vos affaires Communauté Boutique

Apple AirPort Extreme Model A1034 Internet Card Replacement

Ce dont vous avez besoin

  1. Apple AirPort Extreme Model A1034 Internet Card Replacement, Outer Case: étape 1, image 1 de 1

    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

    Modifier

  2. Apple AirPort Extreme Model A1034 Internet Card Replacement: étape 2, image 1 de 1

    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

    Modifier

  4. Apple AirPort Extreme Model A1034 Internet Card Replacement: étape 3, image 1 de 2 Apple AirPort Extreme Model A1034 Internet Card Replacement: étape 3, image 2 de 2

    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

    Modifier

  5. Apple AirPort Extreme Model A1034 Internet Card Replacement: étape 4, image 1 de 1

    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

    Modifier

  6. Apple AirPort Extreme Model A1034 Internet Card Replacement, Internet Card: étape 5, image 1 de 1

    • Remove four 1mm phillips screws from the bottom.

    Modifier

  7. Apple AirPort Extreme Model A1034 Internet Card Replacement: étape 6, image 1 de 1

    • Separate the top and bottom of the metal casing. You will now expose the motherboard and AirPort card.

    • To remove the AirPort card, gently pull the plastic tab horizontally.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Michael Garcia

Membre depuis le 10/12/11

411 Réputation

5 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Cal Poly, Team 17-15, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 membres

13 tutoriels rédigés

Un commentaire

Thank you so much for your guide! I was challenging myself to do it without cheating, but couldn't figure out how to release the bottom plastic layer from the main unit inside after I undid the 3 Torx screws. Thankfully you avoided me having to break the whole unit by showing where the central screw hidden beneath the S/N 3 barcode sticker was and that it was Philips not Torx, and I can now pinch the A1027 wifi card and use it in my G5, instead of relying on ageing ethernet! Bless you kind folks!

HumptyDumpty - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 5,137