Réparez vos affaires

Droit à la réparation

Boutique

Apple AirPort Extreme Model A1034 Motherboard Replacement

En vedette

Rédigé par : Michael Garcia (et 7 autres contributeurs)
  • Commentaires : 0
  • Favoris : 3
  • Réparations terminées : 1

Tutoriel vedette

Difficulté

Modérer

Étapes

8

Temps nécessaire

10 - 15 minutes

Sections

2

Drapeaux

3

Action Shots

Photos d’action

Montrez ce dont un héros est capable ! Ce tutoriel a besoin d'images pour mieux illustrer certaines opérations spécifiques.

Featured Guide

Tutoriel vedette

L'équipe iFixit trouve ce tutoriel particulièrement réussi.

Better Introduction

Meilleure introduction

Améliorez ce tutoriel en complétant ou modifiant l'introduction.

Outils

Acheter ces outils

Pièces

Aucune pièce spécifiée.

  1. Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

    • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

    Modifier

  2. Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

    • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

    Modifier

  3. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

    • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

    Modifier

  4. OUVRIR TOUS LES ONGLETS

    Kits de mise à jour de RAM pour Mac

    Voir les kits

    Assez de RAM
    pour ouvrir tous les onglets

    Voir les kits

  5. Unplug the black connector on the top of the metal casing by gently pulling horizontally.

    • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

    Modifier

  6. Remove the four 4.3mm phillips screws from the bottom of the metal casing.

    • Remove the four 4.3mm phillips screws from the bottom of the metal casing.

    Modifier

  7. Lift and separate the top and bottom of the metal casing. You will now expose the motherboard and the AirPort card.

    • Lift and separate the top and bottom of the metal casing. You will now expose the motherboard and the AirPort card.

    • To remove the AirPort card, gently pull the plastic tab horizontally.

    Modifier

  8. Locate and remove the three 5.0mm phillips screws from the heat sink.

    • Locate and remove the three 5.0mm phillips screws from the heat sink.

    • Lift to remove the heat sink from the motherboard.

    Modifier

  9. Locate and remove the five 7.5mm phillips screws from the motherboard. Lift and separate the motherboard from the bottom metal casing.

    • Locate and remove the five 7.5mm phillips screws from the motherboard.

    • Lift and separate the motherboard from the bottom metal casing.

    • There will be a loose hexagonal female screw extender under the motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 7 autres contributeurs

Michael Garcia

Membre depuis le 12/10/2011

369 Réputation

5 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 17-15, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 19

Total : 5,412