Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
If your driver is malfunctioning or broken, this guide will show you how to replace your Apple IIc floppy Drive.
Ce dont vous avez besoin
-
-
Remove the six 19 mm long screws with a #2 Phillips head screwdriver.
-
-
-
-
Tilt the keyboard up while detaching the ribbon connection by pulling it straight up. You may have to wiggle the connector sideways to loosen it.
-
-
-
Carefully place device upside down to remove the four centered 21.1 mm screws that secure the floppy drive.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
8 autres ont terminé cette réparation.