Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it's hold.
-
To lift the keyboard out pull it up and away from you. Then place the keyboard on the track pad.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the keyboard ribbon vertically from the logic board to release connection.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Your computer should look approximately like this.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two silver Phillips #1 screws that attach the heat shield to the metal framework.
-
Lift the heat shield up and toward you.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the PRAM battery cable vertically upward to disconnect it.
-
Remove the battery by pulling up and to the left.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two T8 Torx screws that attach the heat sink to the processor.
-
Remove the long silver Phillips #1 screw from the heat sink.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift up the heat sink unit from the left side and remove.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the processor on the right side and pull directly up.
-
The RAM chips should be in the slots on the processor.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After removing the RAM, your laptop should now look like this.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.