Introduction

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

Turn computer over.
  • Turn computer over.

  • Remove battery expansion cover and battery.

Ajouter un commentaire

With monitor hinge at the bottom, remove the two top center screws.
  • With monitor hinge at the bottom, remove the two top center screws.

Not necessary for RAM, hard drive, or CPU replacement.

Miles Raymond - Réponse

The Screws are T8!

Willy Kaiser - Réponse

  • Remove top left and top right screws.

Also not necessary for RAM, hard drive, or CPU replacement.

Miles Raymond - Réponse

  • Remove middle left and middle right screws.

Ajouter un commentaire

  • Open computer kickstands.

  • Remove screws underneath each kickstand.

Again not necessary for RAM, hard drive, or CPU replacement.

Miles Raymond - Réponse

  • Lift keyboard from bottom and take out of shell.

Ajouter un commentaire

  • Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.

  • Removing both ribbon cables from the motherboard will leave the clamps like so.

  • From here you can access the logic board, hard drive, and floppy drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Mark McNeff

Membre depuis le 20/04/2011

457 Réputation

2 tutoriels rédigés

http://tim.id.au/laptops/apple/powerbook... (PDF)

Apple Service Source: PowerBook 500 Series

Guides for everything.

tas - Réponse

Thanks been trying to fix this for a long time

Luke Legg - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 11

30 derniers jours : 29

Total : 4,011