Réparez vos affaires Communauté Boutique

Apple TV 4K Remote Logic Board Replacement

Introduction

This guide will show you how to properly get into your Apple TV 4K's remote and get access to the logic board for replacement.

Ce dont vous avez besoin

  1. Apple TV 4K Remote Logic Board Replacement, Remote Logic Board: étape 1, image 1 de 1

    • Heat iOpener according to manufacturer's instructions.

    • Place over the face of the remote to soften the adhesive under the glass.

    Modifier

  2. Apple TV 4K Remote Logic Board Replacement: étape 2, image 1 de 2 Apple TV 4K Remote Logic Board Replacement: étape 2, image 2 de 2

    • Using a spudger, gently lift the face of the remote. Starting from the bottom and working your way to the top.

    Modifier

  3. Apple TV 4K Remote Logic Board Replacement: étape 3, image 1 de 1

    • Push front face forward to disengage plastic clips at the top of the remote.

    Modifier

  5. Apple TV 4K Remote Logic Board Replacement: étape 4, image 1 de 2 Apple TV 4K Remote Logic Board Replacement: étape 4, image 2 de 2

    • Unlatch the connector that binds the touch screen and logic board.

    • Afterwards, use tweezers to detach the connector that binds the touch screen to the logic board.

    Modifier

  6. Apple TV 4K Remote Logic Board Replacement: étape 5, image 1 de 1

    • Lift the face from the body of the remote.

    Modifier

  7. Apple TV 4K Remote Logic Board Replacement: étape 6, image 1 de 2 Apple TV 4K Remote Logic Board Replacement: étape 6, image 2 de 2

    • Lift the latch holding back the connector to the battery.

    • Use tweezers to disconnect the battery connector.

    Modifier

  8. Apple TV 4K Remote Logic Board Replacement: étape 7, image 1 de 1

    • Remove the following screws using a T3 Torx screwdriver:

    • Eight 2mm screws

    Modifier

  9. Apple TV 4K Remote Logic Board Replacement: étape 8, image 1 de 1

    • Using a plastic spudger, gently remove the logic board from the case of the remote.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Keenan Barber

Membre depuis le 10/04/18

1 159 Réputation

3 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

UW Stout, Team S6-G3, Ogden Fall 2018 Membre de l'équipe UW Stout, Team S6-G3, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G3

4 membres

15 tutoriels rédigés

Un commentaire

Have you ever successfully reconnected the ribbon cable after disassembly? It seems nearly impossible to do by hand…

B R - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 42

30 derniers jours : 104

Total : 4,324