Réparez vos affaires Communauté Boutique

Apple Wireless Keyboard Logic Board Replacement

Introduction

You need a Metal spudger and a screwdriver

Ce dont vous avez besoin

  1. Apple Wireless Keyboard Logic Board Replacement, Logic Board: étape 1, image 1 de 2 Apple Wireless Keyboard Logic Board Replacement, Logic Board: étape 1, image 2 de 2

    • Insert a metal spudger to open the plastic part under the Keyboard

    Modifier

  2. Apple Wireless Keyboard Logic Board Replacement: étape 2, image 1 de 1

    • Remove the screw

    Modifier

  4. Apple Wireless Keyboard Logic Board Replacement: étape 3, image 1 de 3 Apple Wireless Keyboard Logic Board Replacement: étape 3, image 2 de 3 Apple Wireless Keyboard Logic Board Replacement: étape 3, image 3 de 3

    • Pull the lock up and disconnect the connection cable

    Modifier

  5. Apple Wireless Keyboard Logic Board Replacement: étape 4, image 1 de 1

    • Keeping the connection cable, push out the logic board's placement

    Modifier

  6. Apple Wireless Keyboard Logic Board Replacement: étape 5, image 1 de 1

    • Unlock the latch of the logic board

    Modifier

  7. Apple Wireless Keyboard Logic Board Replacement: étape 6, image 1 de 1

    • Remove the logic board from the placement

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

20 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Nicola

Membre depuis le 11/14/13

638 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

9 commentaires

Hi, anyone know where its possible to buy this logic board? My bluetooth chip is apparently broken

steve - Réponse

Which model of keyboard is this, because my A1255 doesn't disassemble like this - the battery terminal is solidly restrained inside the tube by means of a metal expansion ring. Doesn't seem user repairable :(

gordon jackson - Réponse

My power button was stuck. The shell was dented. This was an easier way to access and remove the button so I was able to file the inside of the tube smooth so the button would move freely.

Tony - Réponse

I have disassembled my keyboard as shown above, but now I need a replacement Wireless Keyboard Logic Board. I have not been able to find one. Any suggestions?

Martin Rubio - Réponse

Very nice! in my case the flat cable was not properly connecting. I only found out when i opened the cap to the logic board and saw the cable sitting slanted in its connector. Put it back straight and now it works again. Cheers!!

mollymol - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 20

30 derniers jours : 99

Total : 48,113