Introduction

This guide details how to replace the front grille of the Apple iPod Hi-Fi speaker system.

Pièces

Aucune pièce nécessaire.

Warm up the glue by using the hair dryer on the grille for 5-10 minutes.
  • Warm up the glue by using the hair dryer on the grille for 5-10 minutes.

  • You can skip this step if you don't have access to a hair dryer. However, if you skip this step, the next step will take longer and will be harder.

Ajouter un commentaire

Take one spudger and fit it under the grille.
  • Take one spudger and fit it under the grille.

  • Use your first spudger to pry up and make room to insert a second one.

  • Sever the glue connections between the grille and the device by moving one spudger around, cutting through the glue.

  • Use the other spudger to raise the grille, allowing you to see where you're working.

  • Since you're cutting the glue, the grille may not stick as well when reassembled.

Ajouter un commentaire

  • Pull the grille off the Apple iPod Hi-Fi with your hands.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

Timothy Scheuermann

Membre depuis le 18/04/2018

582 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team S16-G1, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S16-G1, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G1

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 69