Introduction
Use this guide to replace a defective front camera in your bq Auqaris M5.
Ce dont vous avez besoin
-
-
Insert the tip of an iFixit opening tool between the back cover and the mid frame of the phone.
-
Slide the opening tool to the bottom of the phone, to snap out the plastic clips, connecting the back cover and mid frame.
-
-
-
-
Unscrew the ten black 4mm Phillips #00 Screws from the mainboard shield.
-
Unscrew the golden 3.4mm Phillips #00 screw on the middle-right side of the mainboard shield.
-
-
-
Use an opening tool or your finger nail to open the FPC connector.
-
Disconnect the FPC connector cable.
-
Use the tip of a spudger to leverage the camera out of its housing.
-
Remove the front camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.